Basic Slide Tables
1-800-513-3163

Slides come in clear anodized aluminum - Display model only

The Basic Jet Rail Slide is a versatile system that allows you to choose your own form of drive, such as a rodless cylinder,
air cylinder, hydraulic cylinder, rack and pinion, etc. The slides offered in both supported and unsupported shafting and are
completely pre-aligned and ready for immediate installation. LM76 Slide Rail Basic Slide Tables are manufactured using LM76
Roller Bearing Pillow Blocks and our precision case hardened and ground 60 Plus and 440C stainless steel shafting. The support
rails, end supports and carriage plate used in these are machined from tempered (T6) aluminum. Available with anodized finish
at an additional cost.

.

FULLY SUPPORTED SLIDE

PART NO.	SHAFT DIA.	TOTAL B.D.R. (LBS.)	A	F1	G	H	J	K	K1	K2	P	Q	R	R1	W
SBSR08FS	1/2	1600	1.125	0.19	2.38	2.187	4.25	1.50	0.75	0.38	5.50	5.30	4.25	4.80	0.48
SBDR08FS	1/2	3200	1.125	0.19	2.38	2.187	4.25	1.50	0.75	0.38	5.50	5.30	4.25	4.80	0.48
SBSR16FS	1	3820	1.750	0.28	3.37	3.437	5.50	2.20	1.20	0.50	9.00	8.70	7.25	8.00	0.60
SBDR16FS	1	7640	1.750	0.28	3.37	3.437	5.50	2.20	1.20	0.50	9.00	8.70	7.25	8.00	0.60
SBSR24FS	1-1/2	6640	2.500	0.34	4.87	5.000	8.00	2.80	1.50	0.65	13.00	13.00	10.75	12.00	0.81
SBDR24FS	1-1/2	13280	2.500	0.34	4.87	5.000	8.00	2.80	1.50	0.65	13.00	13.00	10.75	12.00	0.81

.

END SUPPORTED SLIDE

PART NO.	SHAFT DIA.	TOTAL B.D.R. (LBS.)	A	F1	G	H	J	K	K1	K2	P	Q	R	R1	W
SBSR08ES	1/2	1600	1.125	0.19	2.38	2.187	4.25	1.50	0.75	0.38	5.50	5.30	4.25	4.80	0.48
SBDR08ES	1/2	3200	1.125	0.19	2.38	2.187	4.25	1.50	0.75	0.38	5.50	5.30	4.25	4.80	0.48
SBSR16ES	1	3820	1.750	0.28	3.37	3.437	5.50	2.20	1.20	0.50	9.00	8.70	7.25	8.00	0.60
SBDR16ES	1	7640	1.750	0.28	3.37	3.437	5.50	2.20	1.20	0.50	9.00	8.70	7.25	8.00	0.60
SBSR24ES	1-1/2	6640	2.500	0.34	4.87	5.000	8.00	2.80	1.50	0.65	13.00	13.00	10.75	12.00	0.81
SBDR24ES	1-1/2	13280	2.500	0.34	4.87	5.000	8.00	2.80	1.50	0.65	13.00	13.00	10.75	12.00	0.81