►
Belt Type: 5mm HTD, 50mm wide
Overall belt thickness: 3.6 mm
► Weight minus motor
module: 7.59 kg/meter
►
Specific mass of belt: 0.205 kg/meter
►
Pitch Diameter of Pulley: 44.6mm
►
Belt material: polyurethane, steel reinforced
Max Belt strength @ 3000 rpm: 1300N
►
Pulley Mass Moment of inertia:
0.0001393 kg x meter sq 1.39 x 10-4kg m2
►
Tooth height: 2.1mm
►
Effective Pulley Circumference: 140mm
►
Accuracy: 0.2mm/300mm
►
Max Dynamic Load per carriage: 22.3kN
►
Repeatability: 0.1mm
►
Rail/carriage coefficient of friction: 0.003
►
Breakaway torque: ≤ .33Nm ( in-lbs.)
3:1 and 9:1 Belt Pulley Assemblies Available (
Pulley Belt Assemblies are Covered )
THE BEARING SYSTEM - Why is this important? It has
everything to do with Life and
Performance characteristics of this solid, simple, yet superior actuator.
The SlipStream Belt
Actuator is not only a graceful and aestheticallypleasing design, it's got
some muscle under the hood! The SlipStream rides on the latest profile
rail, caged ball technology.
The Profile Rail system takes the same loads in all 4 mounting positions: up,
down, left and right.
Dependent upon load, the bearing system can see dynamic speeds to 5 meters per
second.
The caged ball system also facilitates higher acceleration.
Conversions
1 newton meter
.73756 pound-force foot
1 kilogram-newton meter
737.56 pound-force foot
As a unit of torque, one foot-pound is the torque
created
by one pound force acting at a perpendicular distance of
onefoot from a pivot point.
