Low Cost Linear Bearings

LM76 Linear Motion Bearings LOW COST Linear Bearings, Shafting & Slides Your SUPER SOURCE for linear motion bearings, shafting, linear slides and industry leading solutions. 1-800-513-3163 Fax: 413-525-3735 www.LM76.com
	LM76 Self Lube Linear/Rotary Bearings offer excellent load capability coupled with low friction. These bearings are All Weather, survive shock/vibration, rapid oscillation and operate quietly and smoothly. Our Minuteman Linear Bearings™ run equally well on hardened Rc60 steel or soft 300 series stainless steel shafting. These bearings are drop-in replacements for linear ball bearings. All standard pillow block/flange blocks are standard. Specials are a specialty.
	LM76 Ceramic Coated Linear Bearings™ require lubrication (light oil/grease) and have - to our knowledge - the longest successful life test of any linear bearing in existance: 100 Million Linear Feet! We have not encountered an application where acceleration and/or system speed have cause failure. They gave seen 120G acceleration!
	LM76 Self Lube FDA/USDA/Washdown Linear Bearings offer a 300 series stainless steel shell coupled with out self lube, FDA/USDA compliant PTFE liner. LM76FDA/USDA Compliant linear bearings survive high pressure/caustic washdown and are well suited for food process, pharmaceutical/medical and packaging machinery applications.
	Stainless Pillow Blocks/Flange Blocks LM76 supplies all 300 stainless pillow Block/Flange block linear bearing assemblies
	LM76 LFG All Weather Linear Bearings offer a fiberglass/resin shell coupled with our industry leading Minuteman Green™, Self Lube liner. These bearings can take a pounding without taking a mechanical set. Classic applications exist in construction equipment, marine, gun mounts, outside door/gate hinges and tilt and swivel applications.
	LM76 EASY...GO Linear Ball Bearings™ are re-circulating, low friction ball bearings. These bearings come in all A Series (Steel Shell - non self aligning) standard sizes open and closed. Our self aligning bearings offer a polymer housing with steel plates for self aligning capability. All standard open/closed, pillow block/flange block sizes in stock.
	LM76 Easy...Go Stainless Linear Ball Bearings offer a 440c Stainless Steel shell, 440c stainless retainer and 440c stainless balls. We also offer a resin retainer.
	JET Rail Linear Roller Blocks™ offer high load, very low friction, smooth operation and quiet performance.These bearings are drop-n replacements for open linear ball bearings. Used extensively in the motion camera industry, packaging machinery, linear stages. Use standard Class L shafting: Rc60/440c stainless.
	LM76 Sprint Linear Shafting™ is available in all standard sizes in Rc60 Steel, 440c stainless and washdown rated 303/304/316 stainless steel. Fully supported, cut and chamfered rounds and special machined-to-print shafting and assemblies. We offer all 300 series stainless standard and low supports.
	LM76 Redi-Thread™ Linear Shafting is off-the-shelf and is available in double treaded ends, single threaded ends, double drilled and tapped ends, single drilled and tapped ends and combination ends.
	LM76 makes SPECIAL sound like STANDARD! LM76 is industry re-noun for their capabilities in both designing and manufacturing special linear/rotary bearings. Countless configurations and materials coupled with over 70 years of sleeve bearing design make LM76 your best source for guidance and products.